Lenox Heat Pump 50677201 User Manual download pdf (Page 8)

Page 8

506728−01

LEG DETAIL

BASE

2" (50.8MM) SCH 40

FEMALE THREADED

ADAPTER

Concrete slab  use two plastic anchors (hole

drill 1/4")

Wood or plastic slab  no plastic anchor (hole

drill 1/8")

COIL

BASE PAN

CORNER POST

STABILIZING BRACKET (18 GAUGE

METAL  2" WIDTH; HEIGHT AS

REQUIRED)

 Slab Side Mounting

#10 1/2" LONG SELF−DRILLING

SHEET METAL SCREWS

#10 1−1/4" LONG HEX HD SCREW

AND FLAT WASHER

Stabilizing bracket (18 gauge metal  2" (50.8mm) width; height as required); bend to form

right angle as exampled below.

FOR EXTRA

STABILITY

 Deck Top Mounting

Elevated Slab Mounting

using Feet Extenders

Install unit level or, if on a slope, maintain slope tolerance of two (2)

degrees (or two inches per five feet [50 mm per 1.5 m]) away from

building structure.

MOUNTING

SLAB

BUILDING

STRUCTURE

GROUND LEVEL

 Outside Unit Placement

 Slab Mounting at Ground Level

SAME FASTENERS AS

SLAB SIDE MOUNTING.

DETAIL A

DETAIL B

DETAIL C

DETAIL D

2" (50.8MM) SCH 40

MALE THREADED

ADAPTER

Use additional 2" SCH 40 male threaded adapters which

can be threaded into the female threaded adapters to

make additional adjustments to the level of the unit.

TWO 90° ELBOWS INSTALLED IN LINE SET WILL

REDUCE LINE SET VIBRATION.

Install unit away from windows.

One bracket per side

(minimum). For extra

stability, two brackets per

side, two inches (51mm)

from each corner.

DETAIL E

MINIMUM ONE

PER SIDE

DETAIL F

WIND BARRIER

INLET AIR

PREVAILING WINTER WINDS

 Roof Top Mounting

If unit coil cannot be mounted away from prevailing winter winds, a wind barrier should be

constructed. Size barrier at least the same height and width as outdoor unit. Mount barrier 24

inches (610 mm) from the sides of the unit in the direction of prevailing winds as illustrated.



Figure 6. Placement, Slab Mounting and Stabilizing Unit

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Lenox Heat Pump 50677201 User Manual Page 8

Comments to this Manuals